Page Comparison

Must have: Way to cross reference all part names

• Create list of part names and allow search engine to identify a part with all names(s)

• Hollander is a universal mapping the salvage yard world, it takes an OEM part and converts it to a Hollander interchange.

• Review CIECA Codes and look at Part Category

• API Search requirements

Must have: Message parameters to search for repair procedures

• This committee would have to define what are all the pieces of information that are going to be required to search for those procedures and that would be 1 standard.

• To get the options on a vehicle, we would ask each manufacturer to help provide the cross reference.

• VIN is used to pull options and some manufacturers call these PR codes

• Scan or search a QR code

Must have: Sending procedures back into the estimating system

• Make sure the procedures are referencing back to lines on an estimate or feeding lines to an estimate.

Nice to have: Repair Categories standardized

• Adaptive Cruise Control Calibration Procedure (Steering, Suspension or both)

• Look at the Top 10 biggest challenges for Repair (ADAS, Repairability of Steel) and work on top issues first

• Look at estimating systems database structure to help identify data needed and how to categorize.

Nice to have: Repair Procedures that can be used for Repair and Insurance

• Insurance companies have to make sure the repair procedure is followed correctly

Nice to have: Repair Procedures by Collision and not Service

• Service does not provide all the detail needed for collision. When working on a replacing a door or fender you may also need to look at headlight that is not in the procedure.

• creating common terminology do we use rail or apron.

Nice to have: Photo validation of repair

• Photos added to the Repair to validate work was completed.

Not in scope: Training technicians

• Remote Assist Technology

Risk to scope: